Getting Started
Required Equipment:
W65C02SXB Microprocessor Board
Breadboard
Male to Female Jumper Wires
Micro-USB Cord
LED Bulb
Conncetion Operation
Connect ground wire to Pin 2 and to the breadboard
Connect Positive Output wire to breadboard and to any pin (5-12) for solid LED or to any pin (17-24) for output of blink file
Connect Cathode of Led to output
Connect Micro USB to port on W65CO2 Board
Connect USB to computer
The LED bulb should be lit solid
Upoloading Blink Program
Download FLC_Blink files here
Extract FLC_Blink files to this file path
Open this Windows Batch File in FLC_Blink folder
Select USB Device
From the run tab, select GO
The LED bulb should now be blinking