ENGR338 Lab Spring 2021
Lab 9: 8-bit ALU
Scott Orban
SJOrban@fortlewis.edu
Introduction
The purpose of this lab was to create an 8-bit ALU using
Electric VLSI and
simulate it using
LTspice.
Materials and Methods
The circuits were built using Electric VLSI and simulated using
LTSpice .
Results
Figure 1: 8-bit inverter schematic.
Figure 2: 8-bit inverter layout.
Figure 3: 8-bit ALU schematic.
Discussion
The schematics and layouts matched and were error free, and the
simulation values were as expected.