CE433 Embedded Devices
Name: Noah Peterson
Email:
npeterson@fortlewis.edu
1. Vivado, Gvim installation, and Preparation
2. The purpose of this lab was to learn the basics of Vim and apply
it through Vivado. First we began by learning the commands needed to
navigate through Vim. Then we recorded all commands in vim to make sure
all commands are known to make navigation easier. These commands were
uploaded to youtube and placed into this lab. Vivado was downloaded as
well to prepare for implemtation of logic gates.
3. Materials and Methods
Vim computer Application
|
Paper and Pencil
|
Vivado Application
|
4. Results
Vim Commands
Figure 1. User interface of Vivado shown produced by Vim.
5. Discussion
Vim is a useful editor to upload code into and produce the logic to
then be implemented into Vivado. Vim commands are to be practiced
comprehensivly to improve navigation and speed while using Vim and
Vivado. Both are helpful tools in the design of logic gates and bigger
complex cuircuits.